|
China Grain & Oil Machinery Group Ltd. is a big group corp. who is specialized in grain & oil machinery and food processing equipment.We have 4 branch factories in China and our products find a ready market in more than 60 countries and regions like Nigeria, South Africa,Egypt,Kenya,Ethiopia, Sudan,Algeria,Russia,Germany,Romania,Albania,Azerbaijan,Armenia,Khazakstan,Uzbekistan,Mongolia,Iran,Syria,Saudi Arabia,Yemem,UAE,Pakistan,Bangladesh,Burma,Viet Nam,Indonesia,Korea,Japan,Mexico,Brazil, Argentina,etc. |
|
|
 |
| |
Pneumatic 8-roller mill: Two passages are broken or ground one directly after the other without intermediate sifting,saving on sifter surfaces and pneumatic expenses,
saving on equipment investment and construction areas.
The new technology of the eight-roller mill:
1.The horizontal roll configuration, resulting in optimum intake of material into the grinding gap, is easier for detachment and maintenance.
2 .The machine can be controlled independently or be controlled concentratedly through a remote panel.
3. The speedy and tardy grinding rolls are driven by triple-wheel toothed belts with advantages of no step losses, no deflection, stable running, and low noises.
4. The adjustable and standard self-aligning roller bearings are used for the grinding rolls to ensure highly concentric precise with rolls running, and sustain high speeds and roll pressures.
5. The dynamically balanced grinding rolls of high-grade centrifugally cast by electric furnace can ensure smooth running and long service life.
6. The eccentric lever engaging structure, rollers undertake running reaction by themselves
7. The gas absorption device is adopted in the kernel grinding system to improve feeding condition, reduce the temperature of grinding rolls and materials.
8. Supports are made from solid cast-iron , the upper and lower split structure is designed for the two side shelves of grinding mill. The damping washer is fitted in the joint.
9. The completely enclosed structure is adopted for the machine. The static electric sprayed paint technology is used in surface treatment.
|
|
|
 |
| |
Pneumatic 4-roller mill
◆Pneumatic servo feeder or control feeding roller’s speed by frequency converter
◆Grinding rollers are placed horizontally sets of grinding rollers undertake running reaction by themselves
◆Grinding rollers cleaned by advance scraper
◆Double route negative press absorb wind equipment inside body
◆Tooth point tapes tighten by spring frame
◆Easy-to-remove casing is a door
◆Conveniently unload material under feed rolls
◆Easy and convenient micrometric adjust grinding gap
The mail features
1.The horizontal roll configuration, resulting in optimum intake of material into the grinding gap, is easier for detachment and maintenance.
2.Feed control system , may control pneumatic servo feeder or frequency.
3.The machine can be controlled independently or be controlled concentratedly through a remote panel.
4.The speedy and tardy grinding rolls are driven by triple-wheel toothed belts with advantages of no step losses, no deflection, stable running, and low noises.
5.Tooth point tapes tighten by spring frame , the trace change of the flexible automatic compensation tap of tension station raises the service life of tape.
6.The adjustable and standard self-aligning roller bearings are used for the grinding rolls to ensure highly concentric precise with rolls running, and sustain high speeds and roll pressures.
7.The dynamically balanced grinding rolls of high-grade centrifugally cast by electric furnace can ensure smooth running and long service life.
8.Easy and convenient micrometric adjust grinding gap
9.The eccentric lever engaging structure, rollers undertake running reaction by themselves
10.The gas absorption device is adopted in the kernel grinding system to improve feeding condition, reduce the temperature of grinding rolls and materials.
11.Conveniently unload material under feed rolls, simple fast.
12.It is cleaning that with advance scraper and adjust more easily.
13.Supports are made from solid cast-iron ,the upper and lower split structure is designed for the two side shelves of grinding mill. The damping washer is fitted in the joint.
14.Easy-to-remove casing is a door
15.The completely enclosed
|
|
|
The plansifters which are widely used for sifting and grading materials milled are the principal equipment in flour industry.It can also be designed for the checking sifter.besides, it may be provided for sifting and grading powder and granular materials in foodstuffs、chemical、medicine and minerals industries.
|
|
|
It is one of the necessary main equipment processing flour of high precision and low ash content in flour factory.Making use of effective combination of sieving.Vibrating and air-inhaling,the coarse flour supplied by plansifters and B mills in before and middle route can be graded and the bran flakes and bran dregs can be removed.So more unanimous and purieied material is ready for the M mill.
It has the features as follows:
（1） Sieves can be put into and drawn out freely like a drawer,and they are pressed tightly lengthways.
（2） It is possible tightening it for 2-3 times continuously when tensile force of sieve cover decreases,for the more,sieve cover can be replaced quickly.
（3） The inhaliny-air pipes,alleyway and inhaling-air chamber have been prepared for all the sieves upper the main-body of machine
（4） The inhaling-air chamber is seperated into several air-volume adjusting chamber lengthways.The air volume in each of them can be adjusted solely. |
|
|
|
6F-1000 complete set of equipment for grade flour processing, capacity 1000 tons of wheat per 24 hours. |
|
|
|
6F-500 complete set of equipment for grade flour processing,capacity 500 tons of wheat per 24 hours. |
|
|
|
6F-250 complete set of equipment for grade flour processing,capacity 250 tons of wheat per 24 hours. |
|
|
 |
| |
Model 6FPD-60 complete set of equipment for grade flour processing
(A)Storeyed-building Type:It mainly consists of 6 four-rollers flour mills model 2550,1 double-bin plansifter type 83,2 multi-bin plansifters,1 purifier type FQFD46*2*3,3 bran finishers and 5 impact detachers.Its mating power is 250KW,and dimension of workshop is 28*7*16（m）;
(B)Steel-frame Type:It mainly consists of 6 four-rollers flour mills type 2550,5 double-bin plansifter type 83,1 purifier type FQFD46*2*3,4 material classifier and 4 impact detachers.Its mating power is 208KW,and dimension of workshop is 25*8*9（m）;
Model 6FPD-80 complete set of equipment for grade flour processing
(A) Storeyed-building Type:It mainly consists of 4 four-roller mills type 2550 and 4 flour-roller mills type 2560,2 plansifters,1 purifier model FQFD46*2*3,1 flour checker and 6 impact detachers,adopting "4B6M1S1T" milling process,capacity 80 tons of wheat per 24 hours,can process top quality 1st flour,2nd flour, super flour and kinds of special purpose flour, mating power 300kw,voltage:380V. Dimensions(L*W*H) for 1st-3rd storey workshop: 21M*7.5M*4.8M, 21M*7.5M*4.5M, 21M*7.5M*4.5M
(B) Steel-frame Type:It mainly consists of 4 four-roller mills type 2550 and 4 flour-roller mills type 2560,7 double-bin plansifters,1 purifier model FQFD46*2*3,1 flour checker and 4 impact detachers,4 h-efficiency material classifiers, adopting "4B6M1S1T" milling process,capacity 80 tons of wheat per 24 hours,can process top quality 1st flour,2nd flour, super flour and kinds of special purpose flour, mating power 280kw,voltage:380V. Dimensions of workshop (L*W*H) :30M*8.5M*10.5M
|
|
|
Model 6FP-50/60 Complete Set of Equipment
Model 6FP-50:It is composed of 8 mills type 2235 and 4 mills type 2240.Its yield is 50T/24h,mating power is 116.8KW,and its overall dimension is 30000*6000*7000（mm）（L*W*H）.
Flour processing mode is entirely air conveying 4B4M1S1T.（H-efficiency frame type Flat sieves）
Model 6FP-60:It is composed of 10 mills type 2240 and 2 mills type 2250.Its yield is 60T/24h,mating power is 136KW,and its overall dimension is 30000*6000*7000（mm）（L*W*H）.
Flour processing mode is entirely air conveying 4B4M1S1T.（H-efficiency frame type Flat sieves）.
|
|
|
|
|
|
